Phone: (919) 341-9037    

Outriggers

You can improve the stability, aesthetics, and performance of our tower loudspeakers with our rigid custom CNC aluminum outriggers that are machined from quarter inch thick aluminum and powder coated black.

Our outrigger and spike kits can dramatically improve speaker performance by rigidly coupling tower speaker enclosures to floors to improve clarity and stereo imaging and to tighten bass response.

They are especially effective on uneven floors and floors with thick carpeting.

 

The small outrigger measures 7.5 inches tip to tip. It has elongated mounting holes that are 2 to 3.5 inches apart. The spike holes are not threaded and are  20/64 inches or 7.8 mm wide. The small outrigger measures 7.5 inches tip to tip. It has elongated mounting holes that are 2 to 3.5 inches apart. It is suitable for speakers that are 4 to 6 inches wide (such as the Role Audio Sampan, Sampan DTL, Windjammer, and Enterprise). The spike holes are 20/64 inches or 7.8 mm wide (They can be widened with an electric drill). Print this picture full sized on 11 by 8.5 inch paper to see actual size.

The large outrigger measures 11.125 inches tip to tip. It has elongated mounting holes that are 4 to 7 inches apart. It is suitable for speakers 7.25 to 9.5 inches wide. The spike holes are spike holes are not threaded and are 20/64 inches or 7.8 mm wide (They can be widened with an electric drill) . 

The extra-large outrigger measures 15.25 inches tip to tip. It has elongated mounting holes that are 8&3/8 to 11&3/8 inches apart. It is suitable for speakers 8.25 to 14 inches wide. The spike holes and the attachment screw holes are not threaded and are 5/16 inches or 7.9 mm wide (They can be widened with an electric drill).

 

Role Audio Outriggers

Large and Extra Large Outriggers Are Out Of Stock

BUY OUTRIGGERS ONLY



size



STANDARD OUTRIGGER KITS

 Our standard outrigger kits are shipped with standard spikes that is shown below:

Role Audio outrigger spike

 

 

Our standard outrigger kits include 4 outriggers, 8 screw retainer inserts and 8 screws to attach the outriggers to the speakers, 8 1/4-20 threaded spikes (seen in photo above),  8 jam nuts and 8 locking knurled top nuts to attach the spikes to the outriggers. 

BUY STANDARD OUTRIGGER KITS



size




DELUXE OUTRIGGER KITS

 

Our deluxe speaker kits are shipped with chrome speaker isolation cones with fine adjustment points and floor protectors

Role Audio outriggers

Outriggers above are shown with deluxe spikes. Outrigger kits with deluxe spikes also include floor protectors.

Role Audio Deluxe outriggers

 



size



Spike Dimensions 

Spike: 3/4" L x 3/16" diameter. 

Thread on spike: 1" L x 1/4" diameter. 

Insert: 13/16" L x 3/8" diameter.

OUTRIGGER AND SPIKE INSTALLATION

NOTE: The outrigger inserts or retainers require drilling 3/8" holes and using 6 mm Allen wrench for installation. This link shows you how to install the spike retainers. The same retainers are used to install the outriggers. The retainers may not look identical to the ones supplied but the installation method is the same. Hand tighten only because using a power tool may strip the holes.

            There is a 25% restocking fee if the outrigger kit is returned.